Delvo DLV45C/DLV70C – AYK Series
Multifunction Electric screwdrivers incorporating brushless motors
| Model | DLV45C12L-AY|K | DLV45C12P-AY|K | DLV70C06L-AY|K | DLV70C06P-AY|K | |
|---|---|---|---|---|---|
| Starting Method | Lever Start | Push Start | Lever Start | Push Start | |
| Power Source | DCC0241X-AZ | ||||
| Torque Adjustment | From 1 to 100% in 1% increments | ||||
| Torque Range (Nm [lbf.in]) | 0.6 to 4.5 [5.3 to 39.8] | 2.0 to 7.0 [17.7 to 62.0] | |||
| SOFT Fastening Free Speed | RPM | 400 to 1200 | 210 to 650 | ||
| Speed Level | Level 1-9 | ||||
| HARD Fastening Free Speed | RPM | 100 to 700 | 100 to 430 | ||
| Speed Level | Automatically set by torque setting | ||||
| Screw Size (mm) | Machine screw | 3.0 to 6.0 | 4.5 to 8.0 | ||
| Tapping screw | 2.5 to 5.0 | 4.0 to 6.0 | |||
| Power Consumption (W) | 44 | ||||
| Bit Type | NK35(OD6.35mm [1/4″]Hex.Shank) | ||||
| Mass | 0.37 kg [0.82lbs] | ||||
| Standard Accessories | Bit NK35 (PH2x7x75): 1pc Connection Cord 2m (DLW9078): 1pc Suspension Bail: 1pc |
||||
| Model | DCC0241X-AZ |
|---|---|
| Input Voltage | AC100 – 240 V AC, 50/60 Hz |
| Output Voltage | 40 VDC |
| Input Signal Method | Photocoupler input (24 V DC drive (5mA/1 input), NPN/PNP switchable) |
| Output Signal Method | Photocoupler output (30 V DC or less (80mA/1 output or less), NPN/PNP switchable) |
| Service Power Source | 24 V DC (Maximum capacity 200 mA) |
| Serial Signal Method | RS-232C |
| ESD (Electrostatic Discharge Protection) | Adopted (IEC61340-5-1 compliant) |
| Mass | 1.8 kg [3.97 lbs] |
| Torque checker | DLT1673A |
|---|---|
| Measuring bit | NK35BN (13 x 19 x 10 x 75) socket bit |
| Screw Joint for DLV45C SOFT Fastening Setting | DLW4050 (measuring bit included) |
| Screw Joint for DLV70C SOFT Fastening Setting | DLW4080 (measuring bit included) |
| Screw Joint for DLV45C/DLV70C HARD Fastening Setting | DLW4040 (measuring bit not included) |