DLR5040A & DLR5340-WE

Delvo DLR5040A & DLR5340-WE
Features

For prevention of human fastening errors and enhanced fastening management accuracy

• Ideally suited for the assembly lines of vehicles and electrical equipment requiring reliable screw fastening
• The controller receives signals from electrical screwdrivers to provide highly reliable screw fastening control
• Count Return function: When a screw is loosened, a reverse signal output from the electric screwdriver reverses the count one by one
• The count correction function does not count elevated screws or double fastening
• Input voltage range from 100 to 240 V AC is acceptable in any part of the world (The screwdrivers to be used in combination with the counter require input power supplies that are written on the respective nameplate)
• Link Connection Function: You can build up a simple sequential screw tightening system by connecting the DLR5040A-WE screw tightening counters in series without using any external controller such as a programmable controller
• Driver lock function prevents unexpected start of screwdrivers
• Compact and lightweight (Compared with our conventional models decreased by 30% in volume and by 38% in mass)
• SPC type screwdrivers for DLR5040A-WE are designed on the basis of established transformerless screwdrivers

Delvo DLR5340-WE

Features

Up to three sets screwdrivers can be connected to one counter

• Up to eight kinds of screw fastening conditions can be stored in internal memory for a wide variety of assemby work
• Count up signal outputs
• Space saving
• The count correction function does not count elevated screws or double fastening as fastening errors
• Count Return function: When a screw is loosened, a reverse signal output from the electric screwdriver reverses the count one by one